What’s a Backslash, besides this: “\”? It’s a nickname for a RC buggy made from the chassis of a Traxxas Slash. Some people call it a Backslash, some people call it a Sluggy (Slash + Buggy). Whatever you call it, the original 4WD variation is the most popular because it’s extremely simple to mount an 1/8 scale wing to the shock tower and change the body to a 1/8 scale buggy one.
I wanted to do one for my 2WD Slash. There are a couple of extra hurdles on the 2WD, like the gearbox being behind the shock tower, but it still seemed do-able. So here is what I did to mount an 1/8 scale wing to my 2WD Slash.
Continue reading →
Looking at it made me think that a similar, but more useful application of vertical bike rack storage, would be for fishing rods. Moore Lake is just down the hill from where I live, and it’s stocked with Bluegills and Bass 🎣
I made this fishing rod holder that attaches to my bike rack for less than $20, mostly from scraps I had in the garage. It holds four rods, but you could adjust it for as many as you’d like, as long as your bike rack setup will accommodate them.
I chose 1-1/4″ PVC because all of our rod handles will fit into that size pipe – you should test fit your thickest fishing rod before you buy.
I attached a PVC coupling to the pipe and then cut the pipe (with the coupling attached) using a hacksaw to 9 inches. This was both the size of my scrap wood and the size of the longest rod handle. You should go longer if your handles are longer than 9 inches.
To make a permanent connection, I used PVC primer and cement to bond the couplers to the pipes.
The couplers are there to serve as stops for the tubing straps – so they don’t fall through them.
To fasten the tube straps to the board I used #10 x 1/2″ sheet metal screws. I pre-drilled holes in the wood with a 1/8″ drill bit, then used a screwdriver on the screws.
I designed 3D printed hangers because I couldn’t find any readily available hooks that I liked at the hardware store. I like Topeak racks because of how their bag systems attach. I designed the hangars to conform to the Topeak’s 10mm rod construction – which I believe is a standard size for many bike racks.
To fasten the hangers to the board, I used #10 x 3/4″ sheet metal screws.
Backing and Hangars
The board I used was some leftover 1/2″ plywood. Mine was 9″ wide so I went with that – luckily that’s how long our rod handles are. You can cut the width to however many rods you want to hold. For my 4 rod holders it wound up being 15″x9″.
To make sure everything lines up well on the back, I used my Thule panniers as an example. The metal plate that sticks to the magnet is approximately 9″x4″ – so I cut a piece of sheet metal that size. You can use a hacksaw to (slowly) cut it. I used a cutting wheel to make quick work.
I also used the Thule pannier as a reference to gauge the placement of the metal backing position relative to the hangers so they’d be generally in the right place. It will ensure the steel plate is the right place so it will line up with the rack magnet without having to move it around on the rack.
I used 3/4″ screws to fasten the hangers, and 1/2″ screws to hold the steel plate. I pre-drilled the steel with a 3/16″ drill bit, and the wood with a 1/8″ one.
There’s no provisions on this rack for bait and tackle, but you can use the opposite side of the rack for a pannier, or just put your bait and tackle in a backpack.
When I’m fishing while paddling, I keep a very small tackle box on the boat with me, and that is also perfect for local fishing by bike.
Usability tips
Riding around with 6-foot fishing poles is like riding around with a whip antenna – it’s real tall. Just beware of any low tunnels or doorways, tree branches, etc.
Also, you’re not going to be able to put a leg over the back like you normally would. A pole (and hooks) will prevent you from doing that. Be mindful while you’re getting on and off.
I (perhaps stupidly) tried out the purple worm seen in my tackle box above – set up as a Texas Rig. I felt some serious bites, but I didn’t land anything. In the end I’m lucky because I didn’t bring a net if I actually had caught a tenacious bass.
While I didn’t bring one, you could certainly put a net in one of the holders. This is more of a catch-and-release type of rig, and I wasn’t planning on any big bites my first time out, just a couple of sunfish 🐟
Disclaimer: I am not left handed, but this is a great transmitter whether you’re left or right handed…
During quarantine I played VRC at least once a week to get my racing fix since all of the tracks were closed. My daughter would often ask if she could try racing as she watched me play. But converting my Spektrum DX3R to left handed operation meant taking it apart to move all the components to the left.
I’d been eyeing a Flysky Noble NB4 because it’s a pro-level low latency transmitter, and it’s killer feature is that it can instantly switch from right to left-handed operation.
Since I wasn’t getting to the track anytime soon, I sold my DX3R and ordered a Noble NB4 with some extra receivers. This write-up will go through some of the features and how I set it up because there are a few things you’ll want to consider.
Continue reading →
March 11th, 2020 to me, felt a lot September 11th. Thousands of people didn’t die in one fell swoop, but it was when Coronavirus shifted from concern to cancellation. What once seemed far away was at our doorstep. A grim reaper coming that would rack up a worldwide death toll two orders of magnitude greater than September 11th.
As trivial as it sounds, WGI was cancelled on March 11th. With units traveling to Ohio from several countries (including Japan) and all over the US, it made sense to cancel it. Should we all be sitting in close quarters in a poorly ventilated arena? Probably not. Sites like is it canceled yet? had been tracking canceled events, and this was just another notch on the bedpost.
Maybe I could still enjoy some local live music? I had tickets for the orchestra that Friday, March 13th. It was to be canceled too, but not entirely. The orchestra would play – without a hall audience, and they would broadcast it on Minnesota Public Radio. The repertoire? Shostakovich’s 7th – The Leningrad Symphony.
Music is one of those things that gives people hope that there will be better days, no matter how bad things get. Shostakovich’s 7th was no stranger to tough times, having been both composed and premiered under dire circumstances.
Connection to Drum Corps
My love of classical music was reinforced through my 4 years marching in the Phantom Regiment Drum & Bugle Corps. I loved playing music that was new (to me), then researching a composer’s other works. I relished finding great recordings, which would further fuel my curiosity.
The obvious connection from Shostakovich’s 7th to my corps, is their 2002 program entitled Heroic Sketches – but long before that program ever took the field, I heard a piece that begged to be performed by a strong hornline. One that wound up being a cornerstone of 2002 show…
Back in the day…
The 1996 Phantom Regiment show Defiant Heart opened with a different piece by Shostakovich called the 4th Ballet Suite. As always, I would find recordings of the music we were playing to hear the original, and to hopefully hear something new.
I bought a recording of the Scottish National Orchestra conducted by Neeme Jarvi on the Chandos Label. It also included Symphony No. 10 – boy was I in for a surprise. I had never heard that Symphony, let alone the second movement Allegro, and it is a thrilling performance.
One of my favorite things about classical compact disc recordings (if they’re included) is the liner notes. Sometimes they have a history of the composer and the piece, and I would often use that as a basis for more research, or just to simply help paint a picture of what the music was about. From this CD the liner notes read:
The second part, the scherzo, is a musical portrait of Stalin
And here is the Phantom Regiment hornline playing an excerpt during their finals warm-up in 2002:
Simply amazing.
Symphony No. 7
That same 2002 program closes out with Shostakovich’s 7th. While researching that piece in 2020 during quarantine, I came across this recording which is stupendous.
I don’t have the CD liner notes to reference, but the comments on the YouTube video are worth reading. This one is my favorite of the bunch. I don’t know if it’s true or not, but I choose to believe it is.
The story goes, Leonard Bernstein was in failing health and he knew he was never going to stand in front of the Chicago Symphony ever again. Apparently there has been a long standing tradition of never encouraging the brass section of the CSO; not even looking at them or else they’ll blow you off the stage. During the end of this concert, and being a helpless romantic himself, good ol’ Lenny not only looked at the Chicago Brass, but he asked for everything they had. And the rest is history!
